VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V

VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V
VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V
VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V
VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V
VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V
VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V
VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V
VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V
VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V
VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V
VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V
VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V

VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V
POWERFUL SPINDLE MOTOR – The water cooled spindle motor with upgraded four bearings adopts rust-proof materials and dynamic balance technology to reduce noise, wear and tear during the actual operation. And the one-time molding design features high concentricity & high precision for an excellent performance. VARIABLE FREQUENCY DRIVE – This VFD driver has a single-phase input and 3 phase output. Control mode: V/F control and vector control. Frequency setting mode: digital setting, analog setting, serial communication setting, PID setting, etc. Various control techniques by both synchronization and non-synchronization dynamically realize fast starting without changing brakes. And the unique control mode attains high torque, high precision, full speed regulation drive, and can adapt to the poor power grid, temperature, humidity, and dust interference ability. 3.5M HIGH LIFT WATER PUMP – The submersible pump comes with a durable shell built with ASB plastic material. Its wear-resistant shaft and magnetic rotor facilitate 3.5 m high lifts and 3500L/H flows. With four powerful rubber suckers, the pump is shock absorption and noise reduction, not easy to fall off. ALUMINUM CLAMP MOUNT – The clamp of the CNC spindle motor is constructed of high-quality cast aluminum for sturdiness and durability. And the well-finished surface is designed to provide a better smoothness. It is high-efficiency for you to fasten the spindle. VERSATILE USE SCENARIOS – With ER11 collets, milling drill bits, aviation plugs, the extension cord, and the connecting wire, this VFD CNC spindle motor kit is widely applicable to engraving machine, lathes, mills, car hoists, pumps, conveyors, and many more. Water Cooled Spindle Motor. Unlike other spindle motors, ours use advanced dynamic balancing technology to achieve low noise, low friction, and long service life. Its durable surface, high-speed core, and four bearings significantly improve efficiency as an ideal tool for the engraving machine. VFD Separate Operation Panel. The variable frequency drive is equipped with full-featured buttons and a detachable panel for quick operation and remote control. Reasonable layout and intuitive digital display increase the convenience of daily use for constant torque loads and variable torque loads. The VFD inverter is rich in digital and analogy control terminals for versatile control. With 110V single phase input and 110V 3 phase output, the VFD is easy to connect with power and motor. And many preservation ways are adopted to ensure stable and reliable operation. The pump has the advantages of high lift, large flow rate, and excellent insulation. It should be wholly immersed in water to operate. We also provide you with water pipes to connect the water pump with the spindle motor effortlessly. The clamp with the finished surface is made of aluminum material, which is lightweight enough for you to install, disassemble, and use easily. After the fixing frame is aligned, you only need to turn the screws to the four corresponding holes to complete the installation. For your convenience, we provide you with 8PCs ER11 collets of different diameters, 20 PCs milling drill bits, aviation plugs, VFD panel keypad extension cord, and connecting wire for use with engraving machines and frequency converters. 1.5KW CNC Spindle Motor Kits. The CNC spindle motor kit comes with a premium spindle motor, variable frequency drive, aluminum spindle clamp for high-temperature resistance, low noise & low friction, and high speed. It is widely applicable to engraving machines for carving materials such as wood, stone, metal, etc. 3.5M High Lift Water Pump. Model: 80 x 1.5KW. Accuracy: 0.002 / 0.05 mm. Runout Off: 0.002 / 0.05 mm. Bearings: 4 PCs 6002. Power: 1.5 KW. Input Phase: 1 Phase. Output Phase: 3 Phase. Input Frequency: 50 Hz. Output Frequency: 0-400 Hz. Flow Rate: 3500 L/H. Pump Lift: 11.48 ft / 3.5 m. Length: 3.3 ft / 1 m. Diameter: 3.15 / 80 mm. Diameter: 1 mm, 2 mm, 3 mm, 3.175 mm, 4 mm, 5 mm, 6 mm, 7 mm. Outer Diameter: 0.45 / 11.5 mm. Height: 0.71 / 18 mm. Shank Diameter: 0.125 / 3.175 mm. Cutting Degree: 10°, 15°, 20°, 30°. Tip: 0.004 / 0.1 mm. 1 x Water Cooled Spindle Motor. 1 x Variable Frequency Drive. 1 x Water Pump. 1 x Water Pipe. 1 x Spindle Clamp. 8 x ER11 Collets. 1 x Set of Router Bits (20 PCs). 2 x Aviation Plugs. 1 x VFD Panel Keypad Extension Cord. 1 x Connecting Wire. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V” is in sale since Monday, April 12, 2021. This item is in the category “Business & Industrial\Industrial Automation & Motion Controls\Electric Motors\General Purpose Motors”. The seller is “bestdiscountvipstore” and is located in Perth Amboy, New Jersey. This item can be shipped to United States, Canada.
  • Model: 80 x 1.5KW
  • Current: 8A
  • Collet Chuck: ER11
  • Cooling: Water Cooled
  • Accuracy: 0.002″ / 0.05 mm
  • Runout Off: 0.002″ / 0.05 mm
  • Bearings: 4 PCs 6002
  • VFD Power: 1.5 KW
  • VFD Input Voltage: 110V
  • VFD Output Voltage: 110V
  • VFD Input Phase: 1 Phase
  • VFD Output Phase: 3 Phase
  • VFD Input Frequency: 50 Hz
  • VFD Output Frequency: 0-400 Hz
  • VFD Output Current: 17A
  • Pump Voltage: 110V
  • Pump Power: 80W
  • Flow Rate: 3500 L/H
  • Pump Lift: 11.48 ft / 3.5 m
  • Pipe Length: 3.3 ft / 1 m
  • Clamp Diameter: 3.15″ / 80 mm
  • Actual Rated Input Voltage: 110 V
  • MPN: XXZNJ008181615948502
  • Clamp Material: Aluminum
  • Collets Outer Diameter: 0.45″ / 11.5 mm
  • Collets Height: 0.71″ / 18 mm
  • Bits Shank Diameter: 0.125″ / 3.175 mm
  • Bits Cutting Degree: 10°, 15°, 20°, 30°
  • Bits Tip: 0.004″ / 0.1 mm
  • Brand: VEVOR
  • Base RPM: 0-24000 RPM
  • Mounting Type: Clip-Mounted
  • Power: 1.5KW
  • Voltage: 110V
  • Frequency: 400 Hz
  • Speed: 0-24000 RPM

VEVOR 1.5KW ER11 CNC Water Cooled Spindle Motor+ VFD Clamp Pump Pipe Collet 110V