GOULDS WATER TECHNOLOGY GT07 Centrifugal Pump, 3/4 HP, 1Ph, 120/240VAC

GOULDS WATER TECHNOLOGY GT07 Centrifugal Pump, 3/4 HP, 1Ph, 120/240VAC
GOULDS WATER TECHNOLOGY GT07 Centrifugal Pump, 3/4 HP, 1Ph, 120/240VAC

GOULDS WATER TECHNOLOGY GT07 Centrifugal Pump, 3/4 HP, 1Ph, 120/240VAC
Centrifugal Pump, 3/4 HP, 1Ph, 120/240VAC. Centrifugal Pump, 3/4 hp HP – Pumps, Voltage – Pumps 120/240V AC, Phase – Pumps 1, Inlet Size – Pumps 1-1/2 in NPT, Outlet Size – Pumps 1-1/2 in NPT, Housing Material – Pumps Cast Iron, Max. This single-phase unit uses an air-water mixture to reach a fully-primed pumping condition. It features built-in overload protection with automatic reset. Grainger Part #:1N441. Add to Favorite Sellers. Sign up to Newsletter. View more great items. POWER FIRST 2XYR7 GFCI Body, 20A, Blk, 125V. STANLEY VIDMAR RP2106ALDB Mod Drawer Cab, 44 H, 9 Drawer, Dark Blue. $2,319.53. PARKER 2-1/4 F5OG-S Straight, Steel, 1/8 x 1/4 in, SAE x FNPTF. DIXON VALVE & COUPLING 2030-DD-AL Cam and Groove Coupling, 2″, 3″, Aluminum. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps”. The seller is “grainger” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Japan, Sweden, Korea, South, Taiwan, South Africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, Ukraine, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Sri Lanka, Luxembourg, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: GOULDS WATER TECHNOLOGY
  • MPN: GT07

GOULDS WATER TECHNOLOGY GT07 Centrifugal Pump, 3/4 HP, 1Ph, 120/240VAC

Goulds Water Technologies Model 3656 Pump with Baldor Motor EJMM3610T

Goulds Water Technologies Model 3656 Pump with Baldor Motor EJMM3610T
Goulds Water Technologies Model 3656 Pump with Baldor Motor EJMM3610T
Goulds Water Technologies Model 3656 Pump with Baldor Motor EJMM3610T
Goulds Water Technologies Model 3656 Pump with Baldor Motor EJMM3610T
Goulds Water Technologies Model 3656 Pump with Baldor Motor EJMM3610T
Goulds Water Technologies Model 3656 Pump with Baldor Motor EJMM3610T
Goulds Water Technologies Model 3656 Pump with Baldor Motor EJMM3610T
Goulds Water Technologies Model 3656 Pump with Baldor Motor EJMM3610T

Goulds Water Technologies Model 3656 Pump with Baldor Motor EJMM3610T
Goulds Water Technologies Model 3656 Pump. Index – 53AI1H9B5 Imp Dia – 4 3/16. Size – 3 x 3-5. Baldor Motor Cat No EJMM3610T. Spec – 35M205Q060G1 HP – 3. Volts – 230/460 Amps – 7.2/3.6. RPM – 3450 Frame – 182JM Hz – 60. PH – 3 Ser F – 1.15 Code – L. Des – B Class – F Nema Nom Eff – 86.5 %. Enclosure – TEFC Serial No – W1707192186. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps”. The seller is “bestsupplyco” and is located in this country: US. This item can be shipped to United States.
  • Brand: Goulds
  • Type: Water

Goulds Water Technologies Model 3656 Pump with Baldor Motor EJMM3610T

NEW! Goulds Pump, Self Priming Centrifugal

NEW! Goulds Pump, Self Priming Centrifugal

NEW! Goulds Pump, Self Priming Centrifugal
Goulds Pump, Self Priming Centrifugal, 3/4 HP! Goulds GT073 Pump, Self Priming Centrifugal, 3/4 HP GT IRRI-GATOR SELF-PRIMING CENTRIFUGAL PUMPS – 60 HZ FEATURES: Self-Priming Design: Once pump is initially primed, filled with water, it will reprise when the water level rises above the end of the suction pipe. Serviceable: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Diffuser (Guide vane): Bolt down diffuser provides positive alignment with impeller. Compliant, injection molded, glass filled Lean® for durability and abrasion resistance. Compliant, glass filled Nary®. Corrosion and abrasion resistant. Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on. Casing: Cast iron, 4-bolt, back pull-out design. Openings for vacuum gauge and casing drain. Can be operated continuously without damage. Mechanical Seal: Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Diaphragm prevents the seal from running dry. Pump: Pipe connections:1½” NPT suction1½” NPT discharge. Capacities: to 110 GPM at 5 foot suction lift. Heads: to 128 feet. Reprime capabilities: to 25 feet suction lift. Maximum working pressure:125 PSIG. Maximum water temperature:140° F (60° C). Rotation: clockwise when viewed from motor end. DISCHARGE CONNECTION SIZE INCHES. Carbon Ceramic Faces, BUNA Elastomer & Stainless Steel Parts. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps”. The seller is “y2-supply2013″ and is located in this country: US. This item can be shipped to United States.
  • Non-Domestic Product: No
  • Modified Item: No
  • Custom Bundle: No
  • MPN: GT073
  • Brand: Goulds

NEW! Goulds Pump, Self Priming Centrifugal

GOULDS WATER TECHNOLOGY GT10 Centrifugal Pump, 1 HP, 1Ph, 120/240VAC

GOULDS WATER TECHNOLOGY GT10 Centrifugal Pump, 1 HP, 1Ph, 120/240VAC
GOULDS WATER TECHNOLOGY GT10 Centrifugal Pump, 1 HP, 1Ph, 120/240VAC

GOULDS WATER TECHNOLOGY GT10 Centrifugal Pump, 1 HP, 1Ph, 120/240VAC
Centrifugal Pump, 1 HP, 1Ph, 120/240VAC. Centrifugal Pump, 1 hp HP – Pumps, Voltage – Pumps 120/240V AC, Phase – Pumps 1, Inlet Size – Pumps 1-1/2 in NPT, Outlet Size – Pumps 1-1/2 in NPT, Housing Material – Pumps Cast Iron, Max. This single-phase unit uses an air-water mixture to reach a fully-primed pumping condition. It features built-in overload protection with automatic reset. Grainger Part #:1N440. Add to Favorite Sellers. Sign up to Newsletter. View more great items. GRAINGER APPROVED AMTE208 Expansion Joint, 8 In, Double Sphere. HUBBELL WIRING DEVICE-KELLEMS HBL67W08 Watertight Locking Receptacle, 20, Yellow. EDSAL UC5260-5 Shelf, 22 ga, 1inx48inx18in, PK5. SQUARE D HU365 Safety Switch, 600VAC, 3PST, 400 Amps AC. $3,192.04. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.
  • Brand: GOULDS WATER TECHNOLOGY
  • MPN: GT10

GOULDS WATER TECHNOLOGY GT10 Centrifugal Pump, 1 HP, 1Ph, 120/240VAC

GOULDS WATER TECHNOLOGY GT15 Centrifugal Pump, 1-1/2 HP, 1Ph, 120/240VAC

GOULDS WATER TECHNOLOGY GT15 Centrifugal Pump, 1-1/2 HP, 1Ph, 120/240VAC
GOULDS WATER TECHNOLOGY GT15 Centrifugal Pump, 1-1/2 HP, 1Ph, 120/240VAC

GOULDS WATER TECHNOLOGY GT15 Centrifugal Pump, 1-1/2 HP, 1Ph, 120/240VAC
Centrifugal Pump, 1-1/2 HP, 1Ph, 120/240VAC. Centrifugal Pump, 1 1/2 hp HP – Pumps, Voltage – Pumps 120/240V AC, Phase – Pumps 1, Inlet Size – Pumps 1-1/2 in NPT, Outlet Size – Pumps 1-1/2 in NPT, Housing Material – Pumps Cast Iron, Max. This single-phase unit uses an air-water mixture to reach a fully-primed pumping condition. It features built-in overload protection with automatic reset. Grainger Part #:1N439. Add to Favorite Sellers. Sign up to Newsletter. View more great items. FLEX NORTH AMERICA 342637 Polishing Pad, 6-1/4 Size, Hook-and-Loop. LEGRAND PN05F06V Cover Clip, Ivory, PVC, PN05 Series, Clips PK 2. JAMCO BJ60YP Flammable Safety Cabinet, 60 Gal. $1,436.18. JUSTIN ORIGINAL WORKBOOTS WK2104- 100 EE Western Boot, 10, EE, Brown, Steel, PR. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.
  • Brand: GOULDS WATER TECHNOLOGY
  • MPN: GT15

GOULDS WATER TECHNOLOGY GT15 Centrifugal Pump, 1-1/2 HP, 1Ph, 120/240VAC

GOULDS WATER TECHNOLOGY GT30 Centrifugal Pump, 3 HP, 1Ph, 240VAC

GOULDS WATER TECHNOLOGY GT30 Centrifugal Pump, 3 HP, 1Ph, 240VAC
GOULDS WATER TECHNOLOGY GT30 Centrifugal Pump, 3 HP, 1Ph, 240VAC

GOULDS WATER TECHNOLOGY GT30 Centrifugal Pump, 3 HP, 1Ph, 240VAC
Centrifugal Pump, 3 HP, 1Ph, 240VAC. Centrifugal Pump, 3 hp HP – Pumps, Voltage – Pumps 240V AC, Phase – Pumps 1, Inlet Size – Pumps 1-1/2 in NPT, Outlet Size – Pumps 1-1/2 in NPT, Housing Material – Pumps Cast Iron, Max. This single-phase unit uses an air-water mixture to reach a fully-primed pumping condition. It features built-in overload protection with automatic reset. Grainger Part #:1N436. Add to Favorite Sellers. Sign up to Newsletter. View more great items. HOOVER CH30000 Handheld Vacuum, Disposable Bag, 79 cfm. GRAINGER APPROVED 1XRZ3 Cam Lock, For Thickness 1 9/64 in. TECHNIKS 05570-367 Collet, ER32,0.3670. BRADY 87740-PK Pipe Marker, PK5. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps”. The seller is “grainger” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, Korea, South, Taiwan, South Africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Ukraine, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: GOULDS WATER TECHNOLOGY
  • MPN: GT30

GOULDS WATER TECHNOLOGY GT30 Centrifugal Pump, 3 HP, 1Ph, 240VAC

GOULDS MODEL 3196 PUMP With15HP MARATHON SEVERE DUTY MOTOR

GOULDS MODEL 3196 PUMP With15HP MARATHON SEVERE DUTY MOTOR
GOULDS MODEL 3196 PUMP With15HP MARATHON SEVERE DUTY MOTOR
GOULDS MODEL 3196 PUMP With15HP MARATHON SEVERE DUTY MOTOR

GOULDS MODEL 3196 PUMP With15HP MARATHON SEVERE DUTY MOTOR
GOULDS MODEL 3196 PUMP W/15HP MARATHON SEVERE DUTY MOTOR. Unused Goulds 1.50 x 3 x 8 Model 3196 pump. Head at 3600 RPM. Powered by 15HP Marathon Sever Duty 3/60/230-460 volt motor. Mounted on carbon steel base. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps”. The seller is “dhgriffin_wrecking” and is located in this country: US. This item can be shipped to United States.
  • MPN: 3196
  • Brand: Goulds
  • Type: Water

GOULDS MODEL 3196 PUMP With15HP MARATHON SEVERE DUTY MOTOR

GOULDS WATER TECHNOLOGY GT20 Centrifugal Pump, 2 HP, 1Ph, 240VAC

GOULDS WATER TECHNOLOGY GT20 Centrifugal Pump, 2 HP, 1Ph, 240VAC
GOULDS WATER TECHNOLOGY GT20 Centrifugal Pump, 2 HP, 1Ph, 240VAC

GOULDS WATER TECHNOLOGY GT20 Centrifugal Pump, 2 HP, 1Ph, 240VAC
Centrifugal Pump, 2 HP, 1Ph, 240VAC. Centrifugal Pump, 2 hp HP – Pumps, Voltage – Pumps 240V AC, Phase – Pumps 1, Inlet Size – Pumps 1-1/2 in NPT, Outlet Size – Pumps 1-1/2 in NPT, Housing Material – Pumps Cast Iron, Max. This single-phase unit uses an air-water mixture to reach a fully-primed pumping condition. It features built-in overload protection with automatic reset. Grainger Part #:1N438. Add to Favorite Sellers. Sign up to Newsletter. View more great items. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps”. The seller is “grainger” and is located in this country: US. This item can be shipped worldwide.
  • Brand: GOULDS WATER TECHNOLOGY
  • MPN: GT20

GOULDS WATER TECHNOLOGY GT20 Centrifugal Pump, 2 HP, 1Ph, 240VAC

GOULDS Pumps GT15 IRRI-Gator Self-Priming Single Phase Centrifugal Pump

GOULDS Pumps GT15 IRRI-Gator Self-Priming Single Phase Centrifugal Pump
GOULDS Pumps GT15 IRRI-Gator Self-Priming Single Phase Centrifugal Pump
GOULDS Pumps GT15 IRRI-Gator Self-Priming Single Phase Centrifugal Pump
GOULDS Pumps GT15 IRRI-Gator Self-Priming Single Phase Centrifugal Pump
GOULDS Pumps GT15 IRRI-Gator Self-Priming Single Phase Centrifugal Pump
GOULDS Pumps GT15 IRRI-Gator Self-Priming Single Phase Centrifugal Pump
GOULDS Pumps GT15 IRRI-Gator Self-Priming Single Phase Centrifugal Pump

GOULDS Pumps GT15 IRRI-Gator Self-Priming Single Phase Centrifugal Pump
GOULDS Pumps GT15 IRRI-Gator Self-Priming Single Phase Centrifugal Pump. Powered for Continuous Operation. You will receive exactly what is in the pictures. If it’s not in the pictures, it’s not included. I try to accurately describe all items including marks or defects, if any. Please let me know of any mistakes. When we post our ads, we select shippers that would be the most cost-effective and expeditious. However, prices or conditions often change when we sell the item, so we reserve the right to select different, but equally cost-effective and expeditious shippers at that time. Thanks in advance for your order. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Centrifugal Pumps”. The seller is “stepco-xjsc6tkz” and is located in this country: US. This item can be shipped to United States.
  • MPN: GT15
  • Centrifugal Pump Type: Self-Priming
  • Brand: GOULDS
  • Rated Power: 1.5 hp

GOULDS Pumps GT15 IRRI-Gator Self-Priming Single Phase Centrifugal Pump

GOULDS Pumps GT15 IRRI-Gator Self-Priming Centrifugal Pump, 1.5 HP 230 Volt 1 PH

GOULDS Pumps GT15 IRRI-Gator Self-Priming Centrifugal Pump, 1.5 HP 230 Volt 1 PH
GOULDS Pumps GT15 IRRI-Gator Self-Priming Centrifugal Pump, 1.5 HP 230 Volt 1 PH
GOULDS Pumps GT15 IRRI-Gator Self-Priming Centrifugal Pump, 1.5 HP 230 Volt 1 PH

GOULDS Pumps GT15 IRRI-Gator Self-Priming Centrifugal Pump, 1.5 HP 230 Volt 1 PH
GOULDS Pumps GT15 IRRI-Gator Self-Priming Centrifugal Pump, 1.5 HP 230 Volt 1 PH. The item “GOULDS Pumps GT15 IRRI-Gator Self-Priming Centrifugal Pump, 1.5 HP 230 Volt 1 PH” is in sale since Thursday, December 16, 2021. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Centrifugal Pumps”. The seller is “nleup778″ and is located in Greer, South Carolina. This item can be shipped to United States.
  • Brand: Goulds
  • Centrifugal Pump Type: Self-Priming
  • Supply Voltage: 230 V
  • MPN: GT15
  • Rated Power: 1.5 hp

GOULDS Pumps GT15 IRRI-Gator Self-Priming Centrifugal Pump, 1.5 HP 230 Volt 1 PH